mowro_logo_white.png

THE NEW LAWN MOWER ROBOT

INSTALLATION

INSTALLATION STEPS

805419-3WYQrg.jpeg

1- Unboxing

Your package comes with everything you need. All you'll need for install is a hammer and wire cutters.

Tip: The lid of your box has a measurement tool you can use throughout install

string-grass-trimming-2021-08-26-23-04-42-utc.jpeg

2- Site Preparation

Your grass needs to start with a fresh cut when installing MowRo. Make sure to remove any obstacles like leaves and pet waste. 

Tip: Edge the perimeter of your lawn so that the wire will stake as close to the ground as possible.

docking-station.png

3- Install Docking Station

The docking station needs to be within 20 feet of a power outlet. There also needs to be adequate room in front of and behind the docking station for MowRo to exit and enter. 

833516-yTbLfx.jpeg

4- Charge MowRo

Place your MowRo on the docking station and allow it to charge while you finish the rest of the installation.

Note: Don't worry about the blinking red light yet, it's still charging.

perimiter-wire-2.png

5- Install Boundary Wire

The wire has to make a continuous loop with the docking station. Use the included stakes and make sure the wire is flush with the ground. 

Stay 12" away from walls, 4" away from flat surfaces, and circle any areas you don't want mowed.

program-the-mowro.png

6- Program MowRo

Set your security pin code, the size of your lawn and the time of day you want MowRo to cut your yard.

Tip: Run the MowRo at night so you wakeup each day to a perfectly manicured lawn.

 

QUICK START VIDEO

 

INSTALLATION FAQ