

THE NEW LAWN MOWER ROBOT
HOW IT WORKS

STEP ONE:
Install the docking station
The docking station has to plug into a 120V outlet. Make sure there is 3 feet of space behind the docking station and 5 feet of space in the front. Once connected set your MowRo on the dock so it can charge while you move on to step two.

STEP TWO:
Lay the perimeter wire
Your MowRo comes with 100 meters of boundary wire and 150 stakes. Make sure you've measured the out line of your yard in case you need to order more. Stake your wire boundary wire into the ground ever 2-3 feet, the wire should be flush with the ground.

STEP THREE:
Program the MowRo
Follow the steps in your manual to set the desired safety pin code, scheduled mowing time, and then start the MowRo's first cut.